PanelsFormwork panels & construction site layoutStructural, industrial & carpentry panels


Chipboards are base boards used for general applications in dry environments.

  • Free pick up in our warehouse at Zottegem.
  • Shipping within Europe possible.
  • Available dimensions and thickness

    • 8x1200x2280 mm
    • 8x1250x2500 mm
    • 8x1250x3050 mm
    • 8x2070x2800 mm
    • 10x1220x2440 mm
    • 10x1250x2500 mm
    • 10x1250x2550 mm
    • 10x2070x3050 mm
    • 10x910x2040 mm
    • 12x1250x2500 mm
    • 12x1250x2550 mm
    • 12x1250x3050 mm
    • 12x2070x2750 mm
    • 12x2070x2800 mm
    • 15x1220x2440 mm
    • 15x1250x2500 mm
    • 15x1250x2550 mm
    • 16x1250x2500 mm
    • 16x1250x2550 mm
    • 16x1250x3050 mm
    • 16x1300x3050 mm
    • 16x1305x3055 mm
    • 16x1500x3000 mm
    • 16x2070x2800 mm
    • 16x2070x2800 mm scier
    • 18x1200x2400 mm
    • 18x1220x2440 mm
    • 18x1250x2500 mm
    • 18x1250x2500 mm scier
    • 18x1250x3050 mm
    • 18x1250x3050 mm scier
    • 18x2070x4110 mm
    • 18x2070x4110 mm scier
    • 18x666x2476 mm
    • 19x1250x2500 mm
    • 19x2070x2800 mm
    • 19x2070x4110 mm
    • 19x610x2070 mm
    • 19x910x2040 mm
    • 21x1250x2500 mm
    • 21x1250x2500 mm scier
    • 22x1250x2500 mm
    • 22x1250x2550 mm
    • 22x1250x3050 mm
    • 22x2070x2800 mm
    • 22x600x2440 mm
    • 22x610x2440 mm
    • 22x910x2040 mm
    • 25x1250x2500 mm
    • 25x1250x3050 mm
    • 25x910x2040 mm
    • 38x1000x2550 mm
    • 38x1220x3050 mm
    • 38x1220x3050 mm scier
    • 38x600x2400 mm
  • Qualities

    The chipboards can be obtained with both a sanded surface or a TopFinish surface:

    • Fine, sanded surface (SA): the right choice if the board needs to be further enhanced with melamine, finishing film, lacquer, veneer or laminate, which is often the case for interior uses.
    • Heat-refined TopFinish (TF) surface: extra hard, closed surface with a greater impact resistance. This finish is easy to clean and therefore ideal for construction applications such as concrete formwork.
  • Applications

    They offer a standard solution for non-structural uses such as interior design, packaging and concrete formwork.

  • Technical specifications

    Specifically, these plates are suitable for use in service class 1 (limited in temperature and humidity) and in biological risk class 1 of standard EN 335-3.

    The chipboards are available in various finishes, thicknesses and dimensions. The plates are also available with PEFC and FSC® labels on request.

Interested in our range? Contact us!